|
Vertical Shaft Measurement
Replacing Vertical Shaft
Engines
|
You Should |
- Compare overall engine size for possible interference with mounting.
- Match the starter type and starter grip position "A"
- Match the Crankshaft's:
|
- Diameter "B" |
|
- Keyway Type "C" |
|
- Length "D" |
|
(The distance from the mounting face of sump - NOT
OIL SEAL - to the end of the crankshaft.) |
|
|
- Match the mounting base dimensions and bolt hole spacing
|
|
 |
|
